PAT Testing in Havering
In-service inspection and testing of plug-in appliances for furnished lets and HMOs. Covering RM1, RM2, RM3, RM4, RM5, RM6, RM7, RM11, RM12, RM13, RM14 and the wider Havering area.
PAT Testing in Havering from
£59.99inc VAT
up to 10 appliances · all inclusive
PAT Testing for Havering landlords
Landlords across Havering book our pat testing service every week. Havering covers RM1, RM2, RM3, RM4 and the wider Havering area, with housing stock that ranges from London's most easterly borough — semi-rural and suburban, with detached houses, bungalows and inter-war semis around Romford and Hornchurch. Our accredited engineers attend at short notice, carry out the inspection on site, and issue your PAT Testing the same day — whether the property sits close to Romford town centre or on the Barking & Dagenham and Redbridge border.
Older wiring runs through much of Havering's stock, and any tenanted property in the borough now needs a satisfactory PAT Testing at intervals of no more than five years under the 2020 Electrical Safety Standards Regulations. In practice we see a large volume of PAT Testing work across converted flats in the RM1 and RM2 postcodes.
PAT testing — now formally called in-service inspection and testing — checks that the plug-in electrical appliances you supply with a property are safe to use. Every item receives a formal visual inspection and, where appropriate, electrical testing for earth continuity, insulation resistance and correct polarity. Each appliance is labelled with its result and retest date, and you receive a certificate plus a full asset register listing every item tested.
Where we work in Havering
We cover Havering in full — every postcode from RM1 through RM14 — and also the neighbouring boroughs of Barking & Dagenham and Redbridge in the same visit routing. Where a job falls inside the Central London Congestion Charge zone, or paid parking applies at the property, both are always shown up front on your quote rather than added afterwards.
Neighbouring boroughs we also cover: Barking & Dagenham, Redbridge. Booking two services in the same visit — for example a PAT Testing and a Gas Safety Certificate — saves your tenant a second appointment.
What the law actually requires
There is no statute that says 'you must PAT test annually'. What exists is a duty: the Electricity at Work Regulations 1989 require electrical equipment to be maintained so as to prevent danger, and for landlords the Landlord and Tenant Act 1985 and the Housing Health and Safety Rating System place responsibility for the safety of supplied appliances on you. The Management of Houses in Multiple Occupation (England) Regulations 2006 go further and require HMO managers to have every supplied appliance inspected at intervals, with a declaration available to the local authority on request. Testing and a written asset register are the accepted way of demonstrating that duty has been discharged.
Your PAT Testing in Havering
Accredited engineers, all-inclusive pricing and same-day certificates.
PAT Testing in Havering — common questions
We can normally attend a Havering property within a day or two, often the same day for urgent jobs. Our engineers routinely work across RM1, RM2, RM3 and the surrounding Romford town centre area, so scheduling around your tenant's availability is usually straightforward.
Yes — every postcode in the borough, from RM1 through RM14. If you also let property just over the border in Barking & Dagenham or Redbridge, we can bundle both into a single visit.
Yes — our PAT Testing starts at £59.99 inc VAT everywhere we cover, including Havering. Where a job in Havering falls inside the Central London Congestion Charge zone, or paid parking applies at the property, both are passed on at cost and always shown on the quote before you confirm.
A PAT Testing (Portable Appliance Testing) in Havering starts from £59.99 inc VAT. up to 10 appliances · all inclusive. All prices are all-inclusive with no hidden call-out fees — the only extras are parking (£5) and the Central London Congestion Charge (£18) where they genuinely apply, and we always disclose these before you confirm.
Yes. All our engineers hold the appropriate accreditations — Gas Safe Registered for gas safety work, NICEIC / NAPIT certified for electrical inspections, and accredited DEAs for EPCs. We carry full public liability insurance and back every job with a 12-month workmanship guarantee.
Yes — fill in our short contact form and we'll come straight back with a confirmed appointment and an all-inclusive price, usually within the hour. You can also call 07426 409342 and we'll book you in within two minutes.
Book your PAT Testing in Havering today
Fill in the form and we'll confirm your appointment and an all-inclusive price, usually within the hour. Prefer to talk? Call us and we'll book you in within two minutes.
More certificates in Havering
Bundle your compliance in a single visit and save time.
Ready to get compliant?
Book your certificate today and have it in your inbox sooner than you'd expect. Friendly, accredited engineers across every London borough.